The top section of the
product
feature
servers per cluster
supported clusters
serial no.
system ID
If you don't need to license Equalizer, stop now. Otherwise, continue with the next step.
3.
If your Equalizer is already registered with Coyote Point, skip this step.
You must register your Equalizer before you can license it. Click on the link shown in the screen above to
register Equalizer. Follow the prompts displayed by the Registration Web Site. You will need to copy the
and the
system ID
system serial number
4.
Do one of the following:
a.
If Equalizer is connected to the Internet and a DNS server is configured, click on the
button to request a license online. The license server will download your license automatically, and ask you
if you want to reboot to apply the license. Select Yes to reboot.
b.
If Equalizer is not connected to the Internet or DNS is not configured, then see the section "Requesting a
License Offline" on page 84, below.
After the system comes back up, there should be no unlicensed error in the left frame or on the
If you licensed Envoy, the
Equalizer System Information
Equalizer Installation and Administration Guide
screen shows the following information for an already licensed system:
license status
Equalizer product model number. Displays
"unlicensed" if the system is not licensed or the
current license is invalid.
Lists any add-on products (such as Envoy) that are
enabled by your current license.
The number of servers per cluster allowed, as
specified by your license.
If your Equalizer model has a limit on the number
of clusters, this line displays the limit (e.g., the
E250GX supports up to 64 clusters)
The serial number of the Equalizer unit (also
printed on the back or bottom of the unit).
The internal system ID.
into the registration form (see Figure 23 on page 82).
screen should show
Help > About
box is expanded.
Envoy geographic load balancing enabled
Licensing Equalizer
get license online
screen.
Help > About
when the
83
Need help?
Do you have a question about the E350GX and is the answer not in the manual?