Layer 4 Persistence Tab; Lb Policy Tab - Coyote Point Systems E350GX Installation And Administration Manual

Layer 4 Persistence Tab

sticky time
inter-cluster
sticky

LB Policy Tab

On this tab, choose a load balancing
policy
responsiveness
The parameter slider bars are static for all policies other than
that the selected policy uses for each parameter. If custom is selected, you can adjust the following load balancing
policy parameters::
delay weight
active connections
weight
agent weight
Equalizer Installation and Administration Guide
sticky time is the number of seconds that Equalizer should "remember"
connections from clients. Valid values are from 0 (which disables sticky
connections) to 1073741823 seconds (or over 34 years). For more
information, refer to "Enabling Sticky Connections" on page 129.
inter-cluster sticky is a Layer 4 option that allows you to extend Layer 4
persistence across multiple server ports. For more information, refer to
"Enabling Sticky Connections" on page 129.
and
policy responsiveness
For all cluster protocols, choose the appropriate load-balancing policy to be
used by this cluster. Choose from round robin (default), static weight,
adaptive, fastest response, least connections, server agent, and
custom. For more information, refer to "Configuring a Cluster's Load-
Balancing Options" on page 127.
responsiveness sets the load-balancing response setting for this cluster.
For more information, refer to "Configuring a Cluster's Load-Balancing
Options" on page 127.
The relative influence on the policy of the current response time between
Equalizer and the server.
The relative influence on the policy of the number of active connections
currently open to a server
The relative influence on the policy of the return value of a server agent (if
any) running on the servers in the cluster.
for the cluster:
, and their positions indicate the relative weight
custom
Working with Virtual Clusters
125