Coyote Point Systems E350GX Installation And Administration Manual page 305

1. Right-click on the cluster name in the left frame and select
2. Type in an event name, such as
editor.
Event Trigger
3. In the field, click on the NOT operator (
operators
4. In the field, click
functions
arrow next to
running
5. In the field, click
operators
6. In the field, click
functions
arrow next to
running
7. Click the next icon (
>
8. In the field, click
functions
arrow next to
quiesce
9. In the field, click
operators
10. In the field, click
functions
arrow next to
quiesce
11. In the field, click
operators
12. In the field, click
functions
arrow next to
unquiesce
13. Click the next icon (
>
the right frame.
To create Event 3:
1. Right-click on the cluster name in the left frame and select
2. Type in an event name, such as
editor.
Event Trigger
3. In the field, click on the NOT operator (
operators
4. In the field, click
functions
arrow next to
running
5. In the field, click
operators
6. In the field, click on the NOT operator (
operators
Equalizer Installation and Administration Guide
, or accept the default. Click the next icon (
activate-sv01
. In the
running expression workbench
. Select and click
sv00 accept
.
&&
. In the
running expression workbench
. Select and click
sv01 accept
)at top to open the
Event Action
. In the
quiesce expression workbench
. Select and click
sv00 accept
.
&&
. In the
quiesce expression workbench
. Select and click
sv02 accept
.
&&
. In the
unquiesce expression workbench
. Select and click
sv01
)at top, and then to create the event. The Configuration tabs for the event open in
commit
, or accept the default. Click the next icon (
activate-sv02
. In the
running expression workbench
. Select and click
sv00 accept
.
&&
Smart Control Event Examples Using VLB
from the menu:
Add Event
).
!
field at bottom, click on the drop-down
.
field at bottom, click on the drop-down
. The
expression workbench
editor.
field at bottom, click on the drop-down
.
field at bottom, click on the drop-down
.
field at bottom, click on the drop-down
. The
accept expression workbench
from the menu.
Add Event
).
!
field at bottom, click on the drop-down
.
).
!
)at top to open the
>
should now look like this:
should now look like this:
)at top to open the
>
301