Displaying And Modifying Site Information - Coyote Point Systems E350GX Installation And Administration Manual

Displaying and Modifying Site Information

To view or modify the information for a particular GeoSite, follow these steps:
1. Log into the Administrative Interface using a login that has
permission on the Site's GeoCluster (see "Logging In" on page 52).
2. Do one of the following:
• In the left-frame object tree, expand the Envoy tree until the name of the Site is visible. Click the Site
name.
• Click the GeoCluster name in the left frame and open the
row for the GeoSite you want to modify.
The Site Configuration tab is displayed.
The
Site Configuration
The IP address returned by DNS when the GeoCluster is accessed. For
example, when a client open www.coyotepoint.com, the local DNS server
returns an A record that contains the IP address for www.coyotepoint.com.
This is usually the address of an Equalizer cluster and in this case is also used
ip
as the resource IP. However, the site's A record IP may be different from the
cluster (resource) IP if the A record IP address is NAT'ed to an internal
address (the actual cluster IP). In this case, you specify the A record IP as the
site IP and the cluster IP as the resource IP.
T
interface address of the Equalizer at this site; if the Equalizer is in
agent
single network mode, this is the internal interface address.
Equalizer Installation and Administration Guide
parameters are explained in the table below:
he IP address of the site monitoring agent. This is the external
(to view only) or
read write
tab. Click the Modify icon
Sites
Working with Sites
(to view or change)
on the
251