Part Names And Functions - Casio Trackformer XW-DJI User Manual

General Guide

Part Names and Functions

1
2
No. Controller:
P (Power) button
1
2 EFFECT area
3 AUTO LOOP area
SCRATCH direction buttons
4R (SHIFT button)
4L
CROSSFADER
5R
(FX PARAMETER)
5L
FILTER knob
6
7 MASTER OUT LEVEL knob
8 HEADPHONE LEVEL knob
9 DECK select buttons
10 CUE POINT area
11 PLAY/PAUSE button
12 SET CUE button
13 CUE PLAY button
SYNC button
14
15 JOG platter
EN-6
6 7
5 9
L
5 3
R
4
L
8
4
R
Turns power on or off.
Controls the EFFECT function. See "About FX (Effects)" for more information.
Controls the AUTO LOOP function. See "About AUTO LOOP" for more information.
Pressing the RIGHT SCRATCH button (4R) enables right-hand operation of the JOG
platter and left-hand operation of the crossfader. Pressing the LEFT SCRATCH button
(4L) enables left-hand operation of the JOG platter and right-hand operation of the
crossfader.
Sliding the fader in the direction of the JOG platter fades in the sound of the deck
assigned by the DJ software. Sliding the 5L (the upper [5] controller in the illustration
above) changes effect parameters.
Rotating to the right results in high pass filter (treble only output) function, while
rotating to the left results in low pass filter (bass only output) function.
Adjusts the output level from MASTER OUT and speaker OUT.
Adjusts the headphone output level.
Used to select the deck to be manipulated by the JOG platter.
Controls the CUE POINT function. See "About CUE POINT" for more information.
Starts or pauses playback.
Sets the CUE POINT (START POINT).
Jumps to the preset CUE POINT (START POINT) and starts playback.
Syncs with the speed (BPM) of the opposite side deck. Pressing this button during
playback syncs with BPM and timing.
Enables scratch and backspin operations with all the feel of a 7-inch record.
15
10 11
Description:
14
13
12