Selection Of Video Formats; Ramp Operation - Sony F35 Operation Manual

PRESET
For resetting all step shutter values to default.
Addition and deletion of step shutter values can be
performed on the <SHUTTER/FPS> page of the USER
(PAINT) menu.
For information on the <SHUTTER/FPS> page, see "3-9
Detailed Shutter Settings" (page 58).

3-2-3 RAMP Operation

The RAMP function permits you to change the FPS value
in a specified duration during shooting.
The RAMP operation page of the subdisplay or the PAINT
menu can be used for the RAMP operation.
While the RAMP operation page is displayed on the
subdisplay, assignable buttons 2 and 3 function as RAMP
operation buttons regardless of the allocations of functions
(see page 41).
RAMP operation page
Function of assignable button 2
1
20 [DIR] [RAMP]
1 5 30s
2 3
At 1 on the first line, the current FPS value is displayed.
1
Set the starting FPS value at 2.
2
Set the ending FPS value at 3.
Pressing assignable button 2 reverses the value at 2
(starting FPS) and that at 3 (ending FPS).
3
Set the transition time (duration) in the range from 0 to
30 seconds at 4.
4
Select the shutter compensation mode (page 36) at 5.
A: Angle Compensation mode
G: Gain Compensation mode
–: No compensation
5
Select the RAMP mode (FPS transition curve) at 6.
L: Linear mode
E: Exponential mode
Assignable button 3 will not function with the –
(RAMP OFF) setting.
6
Press assignable button 3 to start the RAMP operation.
Function of assignable button 3
A L
4 5 6
The FPS transition is executed in the duration you
specified in step 3.
The FPS value at 1 changes according to the
transition progress, and an asterisk appears at the right.
1
3 * [DIR] [RAMP]
1 5 30s
2 3
When the RAMP operation is completed, the asterisk
disappears and the starting FPS value 2 and ending
FPS value 3 will be reversed.
Notes
• You cannot change the 2 to 6 settings after starting the
RAMP operation.
• During a RAMP operation, any FPS control is disabled
on the camera, from the SRW-1, and remote control
units.
• The page on the subdisplay cannot be changed during a
RAMP operation.
RAMP operation using the menu
You can also set and execute the RAMP function on the
<RAMP> page of the PAINT menu (see page 84).
When you start a RAMP operation from the menu, the
RAMP operation page is automatically displayed on the
subdisplay.

3-2-4 Selection of Video Formats

On the subdisplay, the video format can be selected from
among the eight registered formats.
At shipment, the following four formats are registered, and
numbers 5 to 8 are not used:
No. Registered format
1 (default) 23.98P 4:4:4
2 S23.98P 4:4:4
3 S59.94P 4:2:2
4 23.98P 4:2:2
Video-format selection page
_23.98P 444
On the first line, the currently selected format is displayed.
Data-set mode enables you to select the desired format
from among the registered formats.
A L
Indication on the
subdisplay
_23.98P 444
S23.98P 444
S59.94P 422
_23.98P 422
Basic Settings with the Subdisplay
37