Sony F35 Operation Manual page 88

MAINTENANCE menu
Page title &
purpose
<AUDIO> M06
[M02]
Selecting the IF BOX
output SDI channels
to which the
microphone inputs
are added and
setting the signal
delay compensation
<OUTPUT M07
FORMAT> [M03]
Setting the output
video format
<DOWN M08
CONVERTER> [M04]
Setting the aspect
ratio for VBS output
<POWER SAVE> M09
[M05]
Selecting the output
power save mode
88
Menu List
No. Item
CAMERA MIC CH
SELECT
IF BOX
DELAY COMP
AUDIO DELAY
VIDEO DELAY
CURRENT
NEXT
SCAN
FRAME
FIELD
SIGNAL
SELECT FPS
SET FORMAT
ASPECT
MONITOR OUT
DOWN CONVERTER
Default Settings
CH5/6 CH1/2, CH5/6
ON ON, OFF
0 to 3 FRAME
0 to 3 FRAME
23.98PsF 4:4:4
10
PROGRESSIVE PROGRESSIVE,
INTERLACE
23.98 23.98, 24, 25, 29.97, 30,
50, 59.94, 60
59.94 59.94, 50
4:4:4 RGB 4:4:4 RGB, 4:2:2 YCbCr
OFF ON, OFF
Execute by ENTER.
LB SQ, LB, EC
ACTIVE PWR SAVE, ACTIVE
ACTIVE PWR SAVE, ACTIVE
Remarks
Note
The microphone inputs
added to SDI signals sent
to the SRW-1 directly
docked on the camera or
optically connected to the
camera via the CA-F101
are fixed to CH5/6.
ON: The audio delay is
automatically
compensated according
to the video delay on
the main line output of
the camera.
OFF: Only video delays
while audio does not
delay on the main line
output of the camera.
For details, see "Lip Sync
Compensation" (page 144).
DIsplays the amount of
audio delay (in 0.5-frame
steps)
DIsplays the amount of
video delay (in 0.5-frame
steps)
The current format is
displayed.
The format specified on the
subsequent lines and to be
selected by executing SET
FORMAT is displayed.
When SCAN is
PROGRESSIVE
When SCAN is
INTERLACE
SQ: Squeeze
LB: Letter Box
EC: Edge Crop