Example Of System Configuration - Sony F35 Operation Manual

1-2 Example of System Configuration

The diagram below shows a system configuration example
to use of this camera.
In this manual, an optional HDVF-C30WR HD Electronic
Viewfinder is used to instruct how to operate the unit.
Viewfinder
HDVF-C30WR HD Electronic Viewfinder
Products for battery operation
Product
Battery Pack
Battery Adaptor
F35
Product Configuration
Video recorder and related device
SRW-1 HD Portable Digital Recorder
CA-F101 Optical Fiber Camera Adapter
Products for tripod mounting
Name Model name
Bridge Plate BP-5 (ARRIFLEX made)
Shoulder Set S-1 (ARRIFLEX made)
Note
When using the SRW-1, CA-F101, or a control device,
such as an RM-B750, in combination with this camera,
you must check each of their versions.
Model name
BP-GL95
BKP-L551
L handle
Camera head
Riser plate
For more information about the fittings, connections, or
use of additional equipment and accessories, see "Chapter
2 Installation and Preparations" as well as the operation
manuals for the connected equipment.
Product for AC power supply
Product
AC Adaptor
Note: When the AC-DN2B is used, turning on the
camera with an RM-B750 Remote Control Unit
connected may make the RM-B750 inoperable.
To reenable the RM-B750, disconnect and
reconnect the remote control cable maintaining
the power-on status.
Center handle
Assistant panel
Interface box
Remote control devices
RM-B750 Remote Control Unit
MSU-1000/1500 Master Setup Unit
MSU-900/950 Master Setup Unit
System operating device
HDFA-200 HD Optical FIber Adaptor Unit
Data storage media
"Memory Stick PRO"
"Memory Stick PRO Duo"
Consult a Sony representative for information about these
versions.
Model name
AC-DN2B
Example of System Configuration
11