Setting The Marker Indications - Sony F35 Operation Manual

Item Setting
ND ND filter selection:
1, 2, 3, 4, 5 (combination allowed)
WHITE White balance memory selection:
P, A, B (combination allowed)
5600K Custom mode: 5600K ON/OFF
Cine-EI mode and Cine mode: ON for
Daylight, OFF for Tungsten
SHUTT Shutter mode ON/OFF
FAN Fan rotation mode selection:
AUTO1, AUTO2, MIN or MAX
G-COMP Gain compensation mode (normal: OFF)
3-6-4 Viewing the FUNCTION
(Format/Switch Function) Display
If you press the CANCEL/STATUS button with the
ABNORMAL< ! > display on the screen, the display
changes to the following FUNCTION display:
F U N C T I O N
F O R M A T : 2 3 . 9 8 P s F
1
( 2 4 ) F P S
A S 1 : O F F
A S 2 : O F F
2
A S 3 : O F F
A S 4 : O F F
O P T L V L C A M :
3
V T R :
a Format indication
The current video format is displayed.
For details on the formats, see "3-13 Detailed Setting of
the Video Format" (page 63).
b Assignable switch indication
The functions assigned to the assignable buttons and
switch are indicated.
For functions that can be assigned, see "3-2-11 Allocation
of Functions to the Assignable Buttons and Switch" (page
41).
c OPT LVL indication
When the SRW-1 is connected via the optional CA-F101
Optical Fiber Camera Adapter, the optical levels are
displayed.
CAM: Optical reception level on the camera side
VTR: Optical reception level on the SRW-1 side
The status of the level is indicated with eight segments.
If 6 to 8 segments are lit: Normal
If 3 to 5 segments are lit: Cautioning level
If only 1 or 2 segments are lit: Warning level
If no segment is lit: No signal or unusable level
4 : 4 : 4
b
xxxxxxxx
b
xxxxxxxx
For details, refer to the Operation Manual of the CA-F101.

3-6-5 Setting the Marker Indications

The various markers, such as the center marker and safety
zone marker, can be displayed on the viewfinder and
monitor screens.
Example: Center marker (entire cross)
Example: Safety zone marker (90%)
The <CHAR/MARK MIX> page and <MARKER
SETTING> page of the USER (OPERATION) menu allow
you to switch the display of the markers on or off and to set
the display conditions of the markers.
Activating/deactivating all the marker
indications for each output
The <CHAR/MARK MIX> page permits you to activate
and deactivate the marker indications for each output.
<CHAR/MARK MIX> page
< C H A R / M A R K M I X >
V F 1 V F 2 M O N I V B S
C H A R : O N
M A R K E R : O N
B
C U R S O R : O F F O F F O F F
Z E B R A : O F F O F F O F F
C H A R / M A R K L E V E L : 5 0
V F G A T E M A R K E R : O F F
The MARKER indications are activated for all the outputs
at the factory.
Item Setting
VF1 Turn all the markers on or off on the
viewfinder connected to the VF1 connector.
VF2 Turn all the markers on or off on the
viewfinder connected to the VF2 connector.
Viewing and Setting the Viewfinder Displays
U 0 9
O N O N O N
O N O N O N
O F F
53