Hardware Info; Hardware Monitor - Outline TFive User Manual

Professional amplifiers
Note that if you have already input a preset name, or if you have loaded a preset from local memory or smartcard, the
name is kept by the amplifier and used as starting point for a new save preset operation.
For example, suppose that you have loaded a preset named "18IN SUB 1" from a SC, and then you save it into local
memory as shown in figure 2.3.15. In this case the menu shown in figure 2.3.16 asks you if you want to keep/edit that
name (shown figure 2.3.17) or if you would like to edit the name of the preset that is going to be overwritten (shown
figure 2.3.18). This is useful for copying presets from/to smartcard.
Select preset #3
Existing Preset
back back <- ->
figure 2.3.15

2.3.18 Hardware info

In this screen you can view some information about the hardware of the amplifier:
·
S/N the serial number of the amplifier
·
HW ID the hardware identifier (selectable by rear panel rotary encoders)
if you push the "more" button, you can view the other info
·
KFRNT the version number of the front panel
·
KCTRL the version number of the controller
·
KDSP the version number of the DSP board
·
KETH the version number ethernet adapter
if you push the "more" button, you can view the other info
·
Lifetime the operating time of the amplifier

2.3.19 Hardware monitor

In this screen you can view some information about the system parameters:
·
PWRBSCH1 - PWRBSCH2
·
VAUX internal auxiliary voltages
if you push the "more" button, you can view the others parameters:
·
+5VAN auxiliary analog voltage
·
VEXT external remote control voltage
·
VAUX if the "OK" written is displayed, auxiliary voltages of power supply are correct.
·
IGBTCONV if the "OK" written is displayed, the
·
192KHZ if the "OK" written is displayed, the frequency system clock is right
·
Power Supply primary KBUS (Vboost)
·
Clock frequency
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: info@outline.it
Keep this name?
ok
back no
Choose preset name
ok
back
amplifier power supply voltages channel 1-2
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
18IN SUB 1
yes
- +
figure 2.3.16
Existing Pre
^
- sel
+
figure 2.3.18
DC/DC converter monitor function properly
Choose preset name
18IN SUB 1
^
back ok - + sel
figure 2.3.17
T Series
17