The Main Menu - Outline TFive User Manual

The fourth line of the screen shows the functions of the buttons below.
The "lock" function is activated if the corresponding button is pressed more than 1 second; in this case all the other buttons
are locked. The same operation unlocks these buttons (unlock code is required - see par. 2.3.17 for more details).
The "mute" buttons switch off the two channels independently; in this case the parameters of the correspondent channel
disappear and the writing "muted" appears on the third line. The same operation disables the mute function.
If the "menu" button is pressed, the main menu is displayed on the LCD screen.

2.3 The main menu

The figure 2.3.1 shows the main menu. You can scroll the menu items by pushing the up or down buttons and choose the
selected one by pushing "ok" (if the chosen item enables or disables a function, the writing "on" is replaced with "off" for
disabling it, or "on" for enabling it. The menu tree is shown in figure 2.3.2.
menu
* Available only with optional DSP board
** Available only with optional Ethernet board
12
Tel. +39-30-3581341 Fax +39-30-3580431 — Web Site: www.outline.it E-Mail: info@outline.it
The Sound of Big Ideas
Settings
Display
Local Preset
back
Settings Amplifier Settings
DSP Settings (or not present) *
Network Settings (or not present) **
Display Bar meters
Output meters
Temperature
Mains meters
Amplifier Name
Local presets Recall local preset
Save local preset
Setup Setup
Hardware info Hardware info
Hardware monitor Hardware monitor
LCD contrast LCD contrast
Set Keylock code
Menu locking
Service
Outline s.r.l. - Via Leonardo da Vinci, 56 - 25020 Flero (Brescia) - Italy
menu
figure 2.3.1
Output attenuation
Input gain/sens
Input select
Max output voltage
Max mains current
Clip limiter CH1
Clip limiter CH2
Gate CH1
Gate CH2
Mute at Power on
Idle Mode
figure 2.3.2
Analog=>Out
Analog=>DSP=>Out *
AES3=>Out *
AES3=>DSP=>Out *
Network=>Out **
Network=>DSP=>Out * **