If the original power cord is worn or For any technical issues please contact Outline. DISPOSAL OF WASTE MATERIALS Your product is designed and manufactured the users’...
SYSTEM DESCRIPTION The L3000’s four channels of amplification com- W in bridge mode at 8 Ω. Outline amplifiers deliv- bined with internal DSP provide the perfect solution er crystal-clear highs, and a tight, well-defined low for many applications. The flexible two, three or four end.
Powercon connector on its indicated in this manual (90 - 264 V). COOLING All Outline amplifiers implement a forced air-cool- for the first 2s, then its speed will be controlled ac- ing system to maintain low and constant operating cording to the operating temperature.
GREEN. If it RED, there is an output signal clipping. MOUNTING L3000 amplifier is intended for the standard 19” Just lock them with the screws to the accessory and rack mounting. Using the appropriate hardware, that’s it.
Page 8
For this reason, any current Outline product may differ is some aspect from its description, but will always equal or exceed the original design specifications unless otherwise stated.
Need help?
Do you have a question about the L3000 and is the answer not in the manual?
Questions and answers