Download Print this page

Antennas Direct C1 - ClearStream 1 Assembly Manual

Download this manual

1. The ClearStream 1 antenna comes with:

• 1 reflector

• 1 tapered loop element

• 75 ohm transformer (internal)

• 1 threaded bolt

• 1 adjustable mast clamp

3. Align the two halves of the separating column and attach

the reflector (grid) to the antenna element (Tapered loop) by

threading the bolt through the center of the column. Tighten.

C1 -

ClearStream 1

Antenna Assembly

2. Feed the supplied bolt through hole in U

clamp assembly.

4. Assembly complete. Attach the C1

antenna to any kind of mast or mount

(up to 2" in diameter) with the adjustable U

bolt clamp. The 75 ohm coax connector is

in the center rear.

Page 1: Antenna Assembly
C1 - ClearStream 1 Antenna Assembly 1. The ClearStream 1 antenna comes with: 2. Feed the supplied bolt through hole in U • 1 reflector clamp assembly. • 1 tapered loop element • 75 ohm transformer (internal) • 1 threaded bolt • 1 adjustable mast clamp 3. Align the two halves of the separating column and attach 4. Assembly complete. Attach the C1 the reflector (grid) to the antenna element (Tapered loop) by antenna to any kind of mast or mount threading the bolt through the center of the column. Tighten. (up to 2” in diameter) with the adjustable U bolt clamp. The 75 ohm coax connector is in the center rear.
Page 2 Performance 5. ClearStream 1 Gain and VSWR vs Frequency Gain is a measure of an antenna’s ability to concentrate radiated power from a Gain particular direction. Unlike other anten- nas that claim high peak values, The gain of the C1 is not only extremely high but nearly uniform across the DTV spectrum VSWR ( Voltage Standing Wave Ratio).