Ubiquiti airCam Quick Start Manual
  1. Manuals
  2. Brands
  3. Ubiquiti Manuals
  4. Security Camera
  5. airCam
  6. Quick start manual

Ubiquiti airCam Quick Start Manual

Hide thumbs Also See for airCam:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Security Camera

Advertisement

Table of Contents
loading

Related Manuals for Ubiquiti airCam

Summary of Contents for Ubiquiti airCam

  • Page 1 Security Camera...

  • Page 3: Package Contents

    Thank you for purchasing the airCam . This Quick Start Guide is ™ designed to guide you through the installation of the airCam and show you how to access the airCam's configuration interface. This Quick Start Guide also includes the warranty terms.

  • Page 4: Hardware Overview

    Hardware Overview Front Sun Shade Lens remove plastic lens film before use...
  • Page 5 (for outdoor installations) LEDs Power The Power LED will light steady orange when the airCam is connected to a power source. Ethernet The Ethernet LED will light steady green when an active Ethernet connection is made and flash when there is activity.

  • Page 6: Installation Overview

    The ideal outdoor location for mounting the airCam would be under an overhang/eave that shelters the camera. If the airCam is located in a completely open outdoor environment without an overhang/eave, do not install camera with a downtilt of more than 45°.
  • Page 7 Outdoor Installation 1. Press down on the release to remove the Ethernet Door. Important: Do not remove the plug. Plug 2. Connect the Ethernet cable to the Ethernet port.
  • Page 8 3. Insert the Seal into the bottom of the camera and wrap the Seal around the Ethernet cable. Reconnect the Ethernet Door to the airCam, leaving the Ethernet cable fed through the seal at the bottom of the camera. 4. Insert the Mounting Bracket into the Mounting Slots until a click...
  • Page 9 Outdoor Installation 5. There are three recessed areas for the Ethernet cable on the Mounting Bracket Base. Thread the Ethernet cable through two of the recessed areas and out the one that will be closest to your power source. Important: If the power source is above the camera, extend the cable 70-80 mm below the camera body before routing up to the power source.

  • Page 10: Indoor Installation

    Indoor Installation 1. Remove the screw and knob that connect the Mounting Bracket Base to the camera attachment by turning the knob counter-clockwise. Mounting Bracket Base 2. Insert an Ethernet cable through the Mounting Bracket Base. 3. Reconnect the Mounting Bracket Base to the camera attachment by reconnecting the screw and knob.
  • Page 11 Indoor Installation 4. Unscrew the Plug on the back of the airCam. 5. Connect the Ethernet cable to the Ethernet port. 6. Insert the Mounting Bracket into the Mounting Slots until a click is heard to confirm a secure connection.

  • Page 12: Connecting The Power

    7. Position the Mounting Bracket in the desired location and use a pencil to mark the holes on the wall. 8. Use a 6 mm drill bit to drill the holes in the wall. 9. Insert the three Screw Anchors into the wall.
  • Page 13 LAN on the PoE Adapter. 3. Connect the power cord to the power port on the PoE Adapter. Connect the other end of the power cord to a power outlet. The Power LED should light up on the airCam.
  • Page 14 Download and install the latest version of the airVision software at downloads.ubnt.com/airvision; the airVision auto management feature should automatically detect and install your new camera. • Go to the airVision interface to verify the camera is installed. It should appear on the left under Unplaced Cameras.

  • Page 15: Camera Configuration Interface

    1. Make sure that your host machine is connected to the same LAN as the airCam. 2. The airCam is set to DHCP by default. If you have a router or DHCP server providing addresses on your network, please check your DHCP Client Table or download the Ubiquiti Discovery Tool from: http://www.ubnt.com/download#app...
  • Page 16 6. The Main screen will appear and you should see a live video stream from the airCam. Note: If you need to change the airCam network settings (DHCP/Static), go to Network Settings on the Device tab.

  • Page 17: Adjusting The Camera View

    Adjusting the Camera View Adjusting the Camera View Adjusts Mounting Bracket Base Adjusts Camera Side to Side Adjusts Camera Up and Down Adjusts Camera Focus Hardware installation is complete. For details on using the airVision software or the Camera Configuration Interface, download the User Guide from downloads.ubnt.com/airvision...

  • Page 18: Limited Warranty

    (VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;...
  • Page 19 No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS’ facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS.

  • Page 20: Limitation Of Liability

    Limitation of Liability EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING...

  • Page 21: Industry Canada

    Compliance Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
  • Page 22 RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams.
  • Page 23 Compliance Français La directive européenne 2002/96/CE exige que l’équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages.

  • Page 24: Declaration Of Conformity

    UBIQUITI NETWORKS device, megfelel a vonatkozó alapvetõ [Hungarian] követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Íslenska Hér me l sir UBIQUITI NETWORKS yfir ví a UBIQUITI NETWORKS device, er í samræmi vi grunnkröfur og a rar kröfur, sem ger ar eru í [Icelandic] tilskipun 1999/5/EC.
  • Page 25 Declaration of Conformity Latviski Ar o UBIQUITI NETWORKS deklar , ka UBIQUITI NETWORKS device, atbilst Direkt vas 1999/5/EK b tiskaj m pras b m un citiem ar to saist [Latvian] tajiem noteikumiem. Lietuviškai UBIQUITI NETWORKS deklaruoja, kad šis UBIQUITI NETWORKS įrenginys atitinka esminius reikalavimus ir kitas 1999/5/EB...

  • Page 26: Available Models

    The Advanced Gigabit PoE Managed Switch from Ubiquiti Networks Power your Ubiquiti devices with TOUGHSwitch  PoE. TOUGHSwitch PoE ™ delivers reliable power and fast Gigabit connectivity to devices that support passive Power over Ethernet. Simplify Your Deployment TOUGHSwitch PoE deployments increase efficiency and greatly reduce the number of potential failure points, resulting in faster installations and less maintenance and troubleshooting.
  • Page 28 Support Community community.ubnt.com Downloads downloads.ubnt.com w w w . u b n t . c o m © 2011-2013 Ubiquiti Networks, Inc. All rights reserved.

Table of Contents