Ubiquiti UniFi UVC-G3-Flex Quick Start Manual
1080p indoor/outdoor ip camera with infrared and 802.3af support
Hide thumbs
Also See for UniFi UVC-G3-Flex:
- Quick start manual (24 pages) ,
- Quick start manual (21 pages) ,
- Quick start manual (19 pages)
Related Manuals for Ubiquiti UniFi UVC-G3-Flex
Summary of Contents for Ubiquiti UniFi UVC-G3-Flex
- Page 1 1080p Indoor/Outdoor IP Camera with Infrared and 802.3af Support Model: UVC-G3-Flex...
-
Page 2: Package Contents
Package Contents G3 Flex Camera Base Mount Pole/Wall Outdoor Mount Cover Security Screw Screws Screw Anchors Zip Ties (Qty. 1) (Qty. 3) (Qty. 3) (Qty. 2) Installation Requirements • Phillips screwdriver • Drill and 6 mm (1/4") bit for drywall anchors and 3 mm (1/8") for screws) •... -
Page 3: Outdoor Installation Requirements
AC ground of the PoE. We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial‑grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit ui.com/toughcable • Surge protection should be used for all outdoor installations. -
Page 4: Before You Begin
Before You Begin The UVC G3 Flex camera is designed to work with Ubiquiti's new integrated management system, UniFi Protect. UniFi Protect is a flexible and powerful IP video surveillance system that can manage UniFi Protect cameras and the UniFi Protect mobile app. -
Page 5: Hardware Overview
Hardware Overview Microphone Camera Lens Light Sensor Swivel Base Microphone Microphone for recording audio Camera Lens Lens for viewing/recording video Light Sensor Sensor for ambient light detection Status indicator for the following: LED State Status Alternating Device is busy; do not touch or unplug it. White/Blue This usually indicates that a process such as a firmware upgrade is taking place. -
Page 6: Bottom View
Bottom View Reset Button Ethernet Port Ethernet Port The Ethernet Port is a 10/100 Mbps port used to supply power from a PoE 802.3af‑compliant switch to the camera. The switch should be connected to a LAN running DHCP services and the UniFi Video Controller software. Reset Button The Reset Button is used to reset the camera to factory defaults. - Page 7 Additional Mounts Available There are two additional mounts available for the G3 Flex: a Ceiling Mount and a Pendant Mount. Each is sold separately. Use the optional Ceiling Mount, Screw Kit, and Mount Cover to install the G3 Flex camera on a solid horizontal surface or ceiling.
-
Page 8: Installation
Installation The UVC G3 Flex can be installed using one of the following methods: • Desktop For installing on a flat surface such as a desktop or table/shelf; could be set up for temporary installations. Wall/Ceiling • For installing in a secure location; used more for stationary or permanent installations. - Page 9 Desktop 1. Remove the Base Mount from the base of the camera. 2. Insert one end of the RJ‑45 cable into the Ethernet Port and the other end into a PoE 802.3af‑compliant switch. 3. Attach the camera to the Base Mount by lining up the notches with the slots in the base of the camera.
- Page 10 4. Place the camera on a desk or table in its upright position. 5. Adjust the viewing angle or surveillance coverage as needed by following these steps: • Tilt the lens up or down to adjust the angle vertically • Turn the camera body left or right to adjust the angle horizontally Installation complete.
- Page 11 Wall/Ceiling 1. If the Ethernet cable is coming from the inside of a wall: a. Drill or cut a hole in the wall and feed the Ethernet cable through the opening. b. Pull the Ethernet cable forward and slide it through the opening in the mount.
- Page 12 4. Attach the camera to the Base Mount by lining up the notches with the slots in the base of the camera. Press firmly together until the camera is secure. Vertical mounting on a wall Vertical mounting on ceiling Installation complete. Horizozntal Surface / Ceiling with Base Mount Indoor Wall with Base Mount...
- Page 13 Pole Note: If you are mounting the camera outdoors, it must be installed in the upright position to prevent water from getting into the base of the camera. Use the Outdoor Cover for additional protection from moisture. 1. Attach the Pole Mount to a pole using the included Zip Ties. 2.
- Page 14 4. Attach the camera to the Outdoor Cover by lining up the notches with the slots on the bottom of the camera. Press firmly until the camera snaps on. 5. Attach the camera to the Pole Mount: a. Press the camera against the Pole Mount and line up the notches on the mount with the slots on the bottom of the camera.
- Page 15 6. Use a phillips screwdriver to install the Security Screw through the Outdoor Cover and into the base of the camera. This secures the camera to the mount. 7. Adjust the camera to the desired viewing angle by: • Tilting the lens up or down for vertical adjustment •...
- Page 16 Setting Up UniFi Protect via App Download and install the UniFi Protect app to configure the UVC‑G3‑Flex. Note: When you first launch UniFi Protect, the app will prompt you to enable Bluetooth and other relevant features necessary to provide the best user experience possible.
- Page 17 2. Tap the side menu in the upper‑left corner of the app to access additional options. 3. Tap Add Cameras to add a new camera. Note: If setting up multiple cameras, UniFi Protect allows you to add more than one camera during the setup process.
- Page 18 5. A Name your camera screen appears individually for each camera you selected in step 4. Enter a name for each camera and tap Next, repeating this process until all cameras have been named. 6. If necessary, any camera requiring a firmware upgrade will update at this time.
-
Page 19: Specifications
Specifications UVC‑G3‑Flex Ø 107.5 x 48 x 48 mm Dimensions (Ø 4.23 x 1.89 x 1.89") Weight 170 g (5.99 oz) Sensor 1/2.7" 2‑Megapixel HDR Sensor Lens EFL 4mm / f2.0 Viewing Angle with Lens Distortion Correction (LDC) LDC Off 87.4°... -
Page 20: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Hot Surface. Do not touch. WARNING: Do not use this product in a location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 21: Limited Warranty
Limited Warranty ui.com/support/warranty The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Page 22: Rohs/Weee Compliance Statement
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. - Page 23 Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 24: Declaration Of Conformity
2014/53/EU irányelvnek. Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: www.ui.com/compliance Íslenska [Icelandic] Hér með lýsir UBIQUITI yfir því að UVC-G3-Flex er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2014/53/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ui.com/compliance... -
Page 25: Online Resources
Internet: www.ui.com/compliance Română [Romanian] Prin prezenta, UBIQUITI declară că tipul de echipamente radio UVC-G3-Flex este în conformitate cu Directiva 2014/53/UE. Textul integral al declarației UE de conformitate este disponibil la următoarea adresă internet: www.ui.com/compliance Slovenčina [Slovak]... - Page 26 . u i . c o m ©2018‑2019 Ubiquiti Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi Protect are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.