Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ubiquiti UniFi G3 PRO
Summary of Contents for Ubiquiti UniFi G3 PRO
- Page 1 1080p Indoor/Outdoor IP Camera with Infrared Model: UVC-G3...
-
Page 2: Installation Requirements
Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® Video Camera G3. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents UVC-G3 Power Cord* PoE Adapter (24V, 0.5A) with Mounting Bracket*... -
Page 3: Hardware Overview
Adjustable Base Cable Gland Mounting Base Ethernet Connects to the Ubiquiti PoE adapter or UniFi Switch for 24V passive PoE power and data. Reset To reset to factory defaults, press and hold the Reset button for more than 10 seconds while the camera is already... -
Page 4: Hardware Installation
Hardware Installation The UniFi Video Camera G3 can be mounted on a wall, ceiling, or pole. Follow the appropriate steps for your installation: Wall/Ceiling Mount 1. Remove the Mounting Base from the camera by turning the Tilt/Mount Lock counterclockwise. 2. Mark the mounting holes on the wall or ceiling. Cable Slot Note:... - Page 5 3. Use a 7 mm drill bit to drill the mounting holes in the wall or ceiling. Note: If you are running the Ethernet cable through the wall, cut a hole centered between the mounting holes that is large enough to feed the cable through. 4.
- Page 6 5. If you are feeding the Ethernet cable through the wall or ceiling, do so now and feed it through the Mounting Base. If not, feed the Ethernet cable through the Mounting Base and place the cable in the Cable Slot.
- Page 7 6. Fasten the Mounting Base to the wall or ceiling using two Self-Tapping Screws. 7. Remove the camera from the Adjustable Base by turning the Camera Lock counterclockwise.
- Page 8 8. Feed the Ethernet cable through the Cable Gland and Adjustable Base. Then connect the cable to the Ethernet Port on the camera. RESET M/N: UVC-G3 24V 0.5A PoE 9. Connect the camera back to the Adjustable Base by turning the Camera Lock clockwise.
-
Page 9: Pole Mount
10. Set the pan angle of the Adjustable Base while connecting it to the Mounting Base. Then lock the camera to the Mounting Base by turning the Tilt/Mount Lock clockwise. Pole Mount To mount the UVC-G3 on a pole, a metal strap or hose clamp is required (not included). - Page 10 2. Wrap the metal strap around the pole and tighten the strap by turning the screw clockwise. 3. Remove the Mounting Base from the camera by turning the Tilt/Mount Lock counterclockwise.
- Page 11 4. Feed the Ethernet cable through the Mounting Base. 5. Fasten the Mounting Base to the Pole Mount Bracket using two Machine Screws.
- Page 12 6. Remove the camera from the Adjustable Base by turning the Camera Lock counterclockwise. 7. Feed the Ethernet cable through the Cable Gland and Adjustable Base. Then connect the cable to the Ethernet Port on the camera. RESET M/N: UVC-G3 24V 0.5A PoE...
- Page 13 8. Connect the camera back to the Adjustable Base by turning the Camera Lock clockwise. 9. Set the pan angle of the Adjustable Base while connecting it to the Mounting Base. Then lock the camera to the Mounting Base by turning the Tilt/Mount Lock clockwise.
-
Page 14: Connecting Power Over Ethernet
Connecting Power over Ethernet Note: PoE adapters are not included with the UVC-G3 5-pack. Multiple cameras may be powered by a UniFi Switch using 24V passive PoE. 1. Connect the Ethernet cable from the camera to the POE port on the PoE Adapter. 2. - Page 15 UniFi Video Ensure that you are running UniFi Video software version 3.2 or higher. The latest version of the UniFi Video software is available at downloads.ubnt.com/unifivideo The UniFi Video auto-management feature should automatically detect your new camera(s). To manage the camera, perform the following steps: 1.
- Page 16 3. The Camera Details window will appear on the right side of the screen. Enter ubnt in the Username and Password fields and click Manage. The camera will appear in the Managed cameras list. Note: You may need to update the firmware from the Firmware tab to complete the camera installation.
- Page 17 UniFi Video App The UniFi Video mobile app is available for free in the App Store for iOS devices and the Play Store for Android-based devices. For details on using the UniFi Video software, refer to the User Guide at: documentation.ubnt.com/unifivideo...
-
Page 18: Adjusting The Camera View
Adjusting the Camera View 1. Loosen the Tilt/Mount Lock by turning it counterclockwise. Tilt the camera to adjust the angle and rotate it to level the view. 2. To adjust the pan angle or third axis, loosen the Tilt/Mount Lock completely and reseat the Adjustable Base at the desired angle. -
Page 19: Specifications
Specifications UVC G3 Ø 75 x 140 mm Dimensions (2.95 x 5.51") Weight 300 g (10.58 oz) Enclosure Injection-Molded Polycarbonate and Die-Cast Aluminum Sensor 1/3" 4-Megapixel HDR Sensor Lens EFL 3.6 mm, f/1.8 Viewing Angle Before Lens Correction 85° (H), 44.8° (V), 98.1° (D) After Lens Correction 72°... -
Page 20: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Hot surface. Do not touch. WARNING: Do not use this product in location that can be submerged by water. WARNING: Avoid using this product during an electrical storm. -
Page 21: Limited Warranty
Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or (VII) has not been received by Ubiquiti within 30 days of issuance of the RMA. In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation;... -
Page 22: Limitation Of Liability
SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY OF THE FOREGOING. -
Page 23: Industry Canada
Note Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. -
Page 24: Rohs/Weee Compliance Statement
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. RoHS/WEEE Compliance Statement English European Directive 2002/96/EC requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. - Page 25 Español La Directiva 2002/96/CE de la UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 26: Declaration Of Conformity
[German] Anforderungen und den anderen relevanten Vorschriften der Richtlinie 1999/5/EG befindet. Ελληνική Δια του παρόντος, UBIQUITI NETWORKS, δηλώνει ότι αυτή η συσκευή UBIQUITI NETWORKS, είναι σε συμμόρφωση με τις [Greek] βασικές απαιτήσεις και τις λοιπές σχετικές διατάξεις της οδηγίας 1995/5/ΕΚ. -
Page 27: Online Resources
[Swedish] egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. Español Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo UBIQUITI NETWORKS, cumple con los requisitos [Spanish] esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. - Page 28 . u b n t . c o m ©2015 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.