Develop ineo 160 User Manual page 25

Installing the printer driver
4 Installing the printer driver
This section describes the procedure for installing the printer driver. The
printer driver can be installed in two ways: by using "Plug and Play" or by us-
ing the "Add Printer Wizard".
Note
If the machine is to be connected to a USB port, install the printer driver
by using Plug and Play.
If the machine is to be connected to a parallel port, install the printer driv-
er by using the Add Printer Wizard.
Connection
Method
USB port con-
nection
Parallel port
connection
For network printing with the 160F, use the "Add Printer Wizard" to install the
printer driver. During installation, select "LPT1" as the printer port.
For details on specifying network connection settings, refer to the User's
Guide for the Network Interface Card.
Note
In order to use IPP (network) printing, the IPP printing settings must be
specified when the printer driver is installed. For details on specifying the
IPP printing settings, refer to the manual provided with the network inter-
face card.
ineo 160
Compatible Operating
Systems
Windows XP, Windows
Server 2003, Windows 2000,
Windows Me, and Windows
98 SE
Windows XP, Windows
Server 2003, Windows 2000,
Windows NT 4.0, Windows
Me, Windows 98 SE, and
Windows 98
Printer Driver Follow this procedure:
Installation
Install using "Installing the TWAIN driv-
Plug and Play. er/printer driver using "Plug
and Play"" on page 4-5
Install using the "Installing the printer driver
Add Printer using the "Add Printer Wiz-
Wizard. ard"" on page 4-12
4
4-3