Sata (Serial Ata) Connectors; Cooling Fan Connectors - DFI Q7-100 User Manual

SATA (Serial ATA) Connectors

The Serial ATA connectors are used to connect Serial ATA devices. Connect one end of the Se-
rial ATA cable to a SATA connector and the other end to your Serial ATA device.
Chapter 2 Hardware Installation
Chapter 2
GND
7
RXP
SATA 0
RXN
GND
TXN
TXP
SATA 1
1 GND

Cooling Fan Connectors

The fan connectors are used to connect cooling fans. The cooling fans will provide adequate
airflow throughout the chassis to prevent overheating the CPU and system board components.
21
CPU Fan
3
1
Ground Sense
Power
System Fan
3 1
Sense Ground
Power
www.dfi.com