Base Leg Procedures; Procedures On Nal Approach, Landing; Procedures After Landing - Skyleader KP 2U Flight And Maintenance Manual

62
Flight Manual SL 200
3.10.

Base leg procedures

1. Hold airspeed at 100 km/h (54 kt) (62 mph), engine speed 3 500 rpm
2. Propeller pitch – set the min. angle (if it is adjustable)
3. Flaps – in take-off position
4. Trim – as you need
5. RWY, area of fi nal turn – check if it is a clear for approach
3.11.

Procedures on nal approach, landing

1. Hold airspeed at 100 km/h (54 kt) (62 mph); raised idle; maximal descend speed 2,7 m/s (530 fpm)
2. Flaps – in take-off or landing position – according pilot discretion
3. Trim – set nose up
4. RWY – check if it is clear for landing, report
5. At 5 m (15 ft) – set engine on idle and align at 1m (3 ft)
6. Lose speed by stepless pulling of control stick and touch down on main landing gear *
7. Brake as needed, hold direction with control
3.12.

Procedures after landing

1. Vacate RWY, time
2. Engine speed - idle
3. Balancing – neutral
4. Flaps - up
5. Fuel pump – switch off
Book 1
SL200 FMM 2009-10-21