Connecting To A Pc Or Laptop - Cisco 575 LRE CPE Installation Manual

Connecting to a PC or Laptop

Connecting to a PC or Laptop
Step 1
Step 2
Cisco 575 LRE CPE Hardware Installation Guide
2-12
Follow these steps to connect the CPE to a PC or laptop:
Connect one end of the included Ethernet cable to the ENET port of the CPE. (See
Figure 2-5.)
Figure 2-5 Connecting Cables to the CPE
PWR ENET
To To
AC PC or
power laptop
Connect the other end of the Ethernet cable to the RJ-45 connector of the Ethernet
card in your PC or laptop. (See
WALL PHONE
To To
wall telephone
jack
Figure 2-6.)
Chapter 2 Installation
78-11469-01