Connecting To A Wall-Mounted Telephone Jack - Cisco 575 LRE CPE Installation Manual

Connecting to a Wall-Mounted Telephone Jack

Figure 2-7 Ethernet Cable Lying On Desktop
Desktop
Connecting to a Wall-Mounted Telephone Jack
Step 1
Step 2
Cisco 575 LRE CPE Hardware Installation Guide
2-14
Connect
to PC
attached under
Connect one end of a telephone cord (not included) to the WALL port of the CPE.
(See Figure 2-5.)
Note Use a standard telephone cord with RJ-11 connectors on both ends.
Connect the other end of the telephone cord to the telephone jack in the wall.
CPE
a desk
Chapter 2 Installation
Wall
1/2 in.
(12.7 mm)
from wall
78-11469-01