Getting Started
Thank you for your purchase of the Adtec HDMI2QAM. This quick start
guide should help you with your initial setup. Additional support can be provided
through our Customer Support Department.
Telephone: 615.256.6619
Email: support@adtecinc.com
Internet: www.adtecinc.com/supportrequest/
The most recent firmware is available on our support website,
www.adtecinc.com.
Front Panel LEDs:
Channel 1 & 2
Encode
HD
Not Active
1080i Resolution Detected
Encoding
720p Resolution Detected
Transitioning
EAS
Video
Not Currently Used
No Video
(Audio Only)
Video Present
Format Not Supported
No Video Present
SD
SD Resolution Detected
Channel 1
Encode
Video
SD
HD
Encode
Video
SD
HD
Channel 2
System LED Status
Power
Busy
Power is OFF
No Network Traffic
Power is ON
Network Traffic Present
Alarm
EAS
No System Alarm
Not Currently Used
Minor Alarm
Major Alarm
Link
No Link Detected
Link Active
Dual Channel Encoder
QAM
A/B/C
Not Currently Used
256
Not Currently Used
128
Not Currently Used
64
Not Currently Used
QAM
EAS
A/ B /C
256
EAS
128
64
Front Panel Menus:
Use Mode Button to move through top layer menus.
Use arrows for navigation in submenus.
Use select to enter into edit mode and
Top
System
Services
Menu
Banner
Login
CH1
CH2
Quick View 1
Duration
Short Name
Network
Quick View 2
Long Name
Time
Number
NTP
Status
Alarm
Input
COM2
Closed Cap
Firmware
EAS
The front panel will display a 'Quick View' of
your incoming streams on the HDMI ports.
This information can be viewed by pressing
the down arrow key when the front panel is
at it's upmost menu 'System Banner. '
Quick Start Guide
enter to save selection.
Audio
Modulator
CH1
CH2
Mod Encoding
Mode
Mod Mode
Type
UpCnv Channel
UpCnv Power
Units ship with the front panel
logged in by default. If you become
logged out and are prompted for a
password, use the following key
sequence for access.
Press <Select> when panel displays
'User Login -- logged out'
Press <Up arrow>
Press <Select>
Press <Enter>
Press <Right arrow>
Press <Enter>
HDMI
QAM
Quick View
Video Resolution Frame Rate Video Bit Rate
1920x1080 29i 33.77M
1DD 192K 2DD 192K 48
Audio Input 1 & 2
Sampling Rate
Need help?
Do you have a question about the HDMI2qam and is the answer not in the manual?
Questions and answers