Osd Warning Messages - Dell UltraSharp 27 UP2715K User Manual

OSD Warning Messages

When the monitor does not support a particular resolution mode you will see
the following message:
Dell UP2715K
The current input timing is not supported by the monitor display. Please
change your input timing to
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See
Vertical frequency ranges addressable by this monitor. Recommended mode is
5120 x 2880.
You will see the following message before the DDC/CI function is disabled.
Dell UP2715K
The function of adjusting display setting using PC application
will be disabled.
Do you wish to disable DDC/CI function?
When monitor enters Power Save Mode, the following message appears:
Dell UP2715K
Entering Power Save Mode
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, one of the following
messages will appear depending on the selected input:
5120x2880 @ 60Hz or any other monitor
Monitor Specifications
No
Yes
for the Horizontal and
Operating the Monitor  47