Back View - Dell UltraSharp 27 UP2715K User Manual

Back View

1
2
3
4
Label Description
1 VESA mounting holes (100
mm x 100 mm - behind
attached VESA Cover)
2 Regulatory label
3 Security lock slot
4 Barcode serial number label
5 Stand release button
6 Service tag label
7 USB downstream port with
battery charging
8 Cable management slot
* It is recommended to use this port for your wireless USB device whenever
possible.
Back view
5
6
Back view with monitor stand
Use
Wall mount monitor using VESA-
compatible wall mount kit (100 mm x
100 mm).
Lists the regulatory approvals.
Secures monitor with security cable
lock.
Refer to this label if you need to
contact Dell for technical support.
Release stand from monitor.
The Dell service tag is used for Dell
warranty and customer service
management purposes and for records
of the base system.
Connect your USB device.* You can
only use this connector after you
have connected the USB cable to
the computer and USB upstream
connector on the monitor.
Use to organize cables by placing them
through the slot.
About Your Monitor  9
7
8