Connecting The Usb 3.0 Cable - Dell UltraSharp 27 UP2715K User Manual

Connecting the USB 3.0 cable

After you have completed connecting the DP-mDP cables, follow the
procedure below to connect the USB 3.0 cable to the computer and complete
your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB
3.0 port on your computer.
2. Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Plug the power cables for your computer and monitor into nearby outlet.
4. Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not
display an image, see Troubleshooting.
CAUTION: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
USB
Setting Up the Monitor  29