Programming The Water Softener - Miele G 8072 Operating Instructions Manual

Water softener
Programming the water
softener
On machines with integral water
softeners, programme the water
softener as follows.
^ Press the [ control to switch the
machine off.
^ Press and hold controls 4, { and
§, and whilst doing so press [ to
switch the machine on.
P 19 will appear in the top display
and the total water hardness level will
appear in the bottom display in °d
(25 in the display equates to 25°d or
4.5 mmol/l).
^ Press § or ° until the required
hardness level shows in the bottom
display.
^ Save the reading by pressing the 4
control.
^ Press control [ to switch the
machine off.
If the water hardness level changes,
enter the new level following the above
instructions.
If the mains water hardness level is
over 25 °d (4.5 mmol/l), please
contact the Miele Professional
Department about an on-site water
softening system.
18