Error Message Indicated By The X Control - Miele G 8072 Operating Instructions Manual

Error message indicated by the X control

,
Control X flashes red: Caution: danger of scalding. Press the [ control to
switch the dishwasher off.
The water temperature in the boiler or tank has risen above 95°C
Symbol y lights up, and fault code Err 2 or Err 3 shows in the display. Contact
the Miele Service Department. Do not switch the dishwasher on.
Control X lights up red:
The water in the boiler or tank is below the required temperature (when the
dishwasher is first switched on). As soon as the required temperature is reached,
the control lights up green and the wash programme can be started.
Control X flashes blue:
Inadequate pre-cleaning of load will block the filters and reduce the washing
efficiency of the machine. The circulation pump switches off and the control
flashes blue.
Remedy:
^ Switch the dishwasher off using the [ button. The control continues to flash.
^ Remove the filters, clean them, and replace. The light will stop flashing after 5
minutes.
^ Press control [ to switch the dishwasher on again and continue the
programme.
^ Make sure you pre-clean utensils properly before loading in future.
Correcting minor faults
43