Preparation - Miele G 8072 Operating Instructions Manual

Preparation

^ Open the stopcock to the water
supply.
^ Switch on the electricity at the mains.
^ Check that automatic cleaning agent
and rinsing agent dispensers are full,
if applicable (see indicator lights on
control panel).
,
Be careful not to splash cleaning
agent or rinsing agent on your skin,
as they can cause irritation. Follow
safety advice given on the
packaging. Wear protective gloves
and safety goggles.
^ If the dispensers are not full: Re-fill
the container, or exchange the empty
one for a full one.
For machines with an external
dispensing system (optional
feature), please follow the
appropriate instructions.
Only use cleaning agents formulated
for this machine.
^ Check that all the filters are in place.
^ Do not load the machine yet.
^ Shut the hood and leave it shut
during the heat-up phase.
^ Press the On/Off switch ([).
The heating up phase will begin.
The programme control X will light
up red. The boiler and tank will fill up
with water, and the water will heat up.
Control X will light up green when
the filling and heating phase is
complete.
^ Lift the hood.
30