JVC KD-A805 Instruction Manual page 45

The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
This unit can only display letters (capital: A-
I,
small: a- z), numbers, and alimited number of symbols
(see page 37).
Check whether the track is aplayable file format.
• While playing atrack, sound is sometimes
interrupted.
• Correct characters are not displayed (e.g.
album name).
• "Not Support" appears on the display and
track skips.
• The unit does not detect the Bluetooth
device.
• Search from the Bluetooth device again.
• Reset the unit. When "Wait Pair" appears on the
display, search from the Bluetooth device again.
• The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
• Echo or noise occurs.
Adjust the microphone unit's position.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of aBluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to aplace where you can get abetter
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth Phone.
• Turn off, then turn on the unit.
• Connect the player again, when the sound is not yet
restored.
• The connected audio player cannot be
controlled.
• Check whether the connected audio player supports
AVRCP (AudioNideo Remote Control Profile).
(Operations depend on the connected audio player.)
• Disconnect and connect the Bluetooth player again.
• The unit does not response when you tried
to copy the phonebook to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press D1SP or BACK to exit.
Continued on the next page
REFERENCES
45
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
This unit can only display letters (capital: A-
I,
small: a- z), numbers, and alimited number of symbols
(see page 37).
Check whether the track is aplayable file format.
• While playing atrack, sound is sometimes
interrupted.
• Correct characters are not displayed (e.g.
album name).
• "Not Support" appears on the display and
track skips.
• The unit does not detect the Bluetooth
device.
• Search from the Bluetooth device again.
• Reset the unit. When "Wait Pair" appears on the
display, search from the Bluetooth device again.
• The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
• Echo or noise occurs.
Adjust the microphone unit's position.
• Phone sound quality is poor.
• The sound is interrupted or skipped during
playback of aBluetooth audio player.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to aplace where you can get abetter
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for Bluetooth Phone.
• Turn off, then turn on the unit.
• Connect the player again, when the sound is not yet
restored.
• The connected audio player cannot be
controlled.
• Check whether the connected audio player supports
AVRCP (AudioNideo Remote Control Profile).
(Operations depend on the connected audio player.)
• Disconnect and connect the Bluetooth player again.
• The unit does not response when you tried
to copy the phonebook to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press D1SP or BACK to exit.
Continued on the next page
REFERENCES
45