Usb Operations; Turn On The Power - JVC KD-A805 Instruction Manual

USB operations
This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit).
You can use these two terminals at the same time.
• You can also connect a USB Bluetooth Adapter (KS-UBT1) and/or an Apple iPod/iPhone to the USB input
terminal(s). For details of the operations, see pages 13 - 18 and 24 - 26.
This unit can play MP3IWMAIWAV tracks stored in aUSB mass storage class device (such as aUSB
memory, Digital Audio Player, portable HOD; etc.).
Turn on the power.
Connect a USB device.
All tracks will be played repeatedly until you
, change the source or disconnect adevice.
If aUSB device has been attached•••
Playback starts from where it has been stopped
previously.
• If adifferent USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the USB input terminal.
• "No USB" appears. Press SRC to listen to another
playback source.
12
You can operate the USB device in the same way you
operate the files on adisc. (See page 11.)
• You can listen to WAV files by following the MP31
WMA file operations listed on page 11.
USB operations
This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit).
You can use these two terminals at the same time.
• You can also connect a USB Bluetooth Adapter (KS-UBT1) and/or an Apple iPod/iPhone to the USB input
terminal(s). For details of the operations, see pages 13 - 18 and 24 - 26.
This unit can play MP3IWMAIWAV tracks stored in aUSB mass storage class device (such as aUSB
memory, Digital Audio Player, portable HOD; etc.).
Turn on the power.
Connect a USB device.
All tracks will be played repeatedly until you
, change the source or disconnect adevice.
If aUSB device has been attached•••
Playback starts from where it has been stopped
previously.
• If adifferent USB device is currently attached,
playback starts from the beginning.
Stop playing and detaching the USB device
Straightly pull it out from the USB input terminal.
• "No USB" appears. Press SRC to listen to another
playback source.
12
You can operate the USB device in the same way you
operate the files on adisc. (See page 11.)
• You can listen to WAV files by following the MP31
WMA file operations listed on page 11.