Door Speaker Assembly Connections; Rear Panel Connections - Elan PZ6 Series II Installation Manual

E L A N H O M E S Y S T E M S
C
ONNECTIONS
INSTALLATION TIP
Use the color-code
overlay to ensure cor-
rect Door Speaker
Assembly connections.
© ELAN Home Systems 2002 • All rights reserved. 3/02
Z•600 C C OMM C C ONTROLLER C C ONNECTIONS

REAR PANEL CONNECTIONS

TELEPHONE SERVICE AND HOUSE CONNECTIONS
1. On the rear panel of the PZ6, connect the incoming telephone service's
TIP and RING to the TIP TELCO and RING TELCO terminals on the
PZ6's TELCO punchdown connector.
2. Connect TIP PHONE and RING PHONE terminals on the PZ6's TELCO
punchdown connector to the appropriate line on the telephone punch-
down block.

DOOR SPEAKER ASSEMBLY CONNECTIONS

There are two punchdown connectors on the back of the PZ6 for the connection
of ELAN Door Speaker Assemblies (labeled DOOR SPEAKER 1 & DOOR
SPEAKER 2). The Z•600 may access each of the door stations independently.
NOTE: For additional information, see the Z•600 Comm Controller's Users
Manual.
BRAND X
ELECTRONIC
DOOR LATCH
MECHANISM
DOORLATCH
POWER
SUPPLY
DOORBELL BUTTON DOORBELL
BUTTON
(INCLUDED WITH DSC2000)
(INCLUDED)
ELAN DSC2000 (rear)
INSTALLATION MANUAL
Series II
22/24 AWG 4-TWISTED
PAIR W/ SHEILD
Wh/Blue
Wh/Green
Wh/Orange
Green
Orange
Brown
(Cut drain wire flush)
Wh/Brown
*NOTE: Punchdown the stranded DRAIN wire first, then
punchdown the Orange DB- wire on top of it
PZ6
PZ6RM Door
Speaker Connector
Blue
M+
M-
DB+
L+
L-
*
DB-
DS+
DS-
Page 9