E L A N
H O M E
S Y S T E M S
T
O
RIM
UT
C
ONNECTIONS
© ELAN Home Systems 2002 • All rights reserved. 3/02
All system wire runs are pulled through the PZ6 frame. Lay the PZ6 front panel
on the floor in front of the frame and make all your connections. Dress the wires
in neat bundles––being careful not to pull off any punchdown connections––
and then carefully place the front panel back into the frame and secure using
the four screws. See pages 7-13 for detailed System Connections.
INTERCONNECT C C ABLES
ELAN now carries a variety of interconnect cables for use with the PZ6 as well
as other Audio/Video applications
INSTALLATION MANUAL
Series II
Page 4