Z•Series Amplifier Connections - Elan PZ6 Series II Installation Manual

System precision panel
Table of Contents

Advertisement

E L A N
H O M E
S Y S T E M S
C
ONNECTIONS
Make sure that the amplifier is powered down before making any of the following connections.
ELAN "BJACK" Blackjack
Gold-Plated Banana Plugs
© ELAN Home Systems 2002 • All rights reserved. 3/02
Z•SERIES A A MPLIFIER C C ONNECTIONS
FRONT PANEL CONNECTIONS
Connect the amplifier's speaker outputs to the speaker binding posts on the
front of the PZ6. To avoid the possibility of a loose wire strand creating a short,
we recommend the use of ELAN BLACKJACK Banana Plugs.
REAR PANEL CONNECTIONS
Connect the wire runs coming from the speakers in each room to the rear panel
binding posts on the PZ6. Make sure each speaker is connected to the appro-
priate amplifier channel for that room. Once again we recommend the use of
ELAN BLACKJACK Banana Plugs to reduce the possibility of loose wire strands
causing shorts.
INSTALLATION MANUAL
Series II
Page 13

Advertisement

Table of Contents
loading

Table of Contents