Table of Contents
Advertisement
E L A N
H O M E
S Y S T E M S
C
ONNECTIONS
© ELAN Home Systems 2002 • All rights reserved. 3/02
Z•600 C C OMM C C ONTROLLER C C ONNECTIONS
PZ6 REAR PANEL CONNECTIONS (continued)
RELAY CONNECTIONS
The Z•600 can activate up to four low voltage relays via the telephone (#,1,1)
(#,1,2) (#,1,3) (#,1,4) for control of lighting, automatic doors, sprinkler systems,
etc. A dedicated punchdown connector is provided on the back of the PZ6 for
this purpose. The diagram below shows the connections to the RELAY
punchdown connector on the reart of the PZ6.
CONNECTING ELAN VOLUME CONTROLS WITH OVERRIDE TO THE PZ6
The rear panel of the PZ6 has a dedicated punchdown connector for terminating
ELAN Volume Controls with Override. Simply punch down the VC+ and VC-
wires coming from each volume control with override to the VC+ and VC-
connector on the rear of the PZ6. Be sure to maintain proper polarity.
USING THE Z•600 COMM CONTROLLER'S INTERNAL POWER SUPPLY
FOR OVERRIDE CONTROL
A maximum of 5 ELAN volume controls with override may be powered using the
Z•600's internal power supply. If additional volume controls with override are to
be utilized, an external +12VDC power supply (ELAN Z•027) will be required
(see next page).
INSTALLATION MANUAL
Series II
Page 10
Advertisement
Table of Contents
