Dect Function; Registering The Fritz!Fon Mt-F Cordless Telephone - Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation

DECT Function

7 DECT Function
Cordless Telephony with FRITZ!Box
Thanks to the integrated DECT function, the FRITZ!Box Fon WLAN 7340
can be used as a base station for cordless telephones that support the
DECT GAP or CAT-iq standard. A total of up to six cordless telephones
can be registered on the FRITZ!Box.
7.1

Registering the FRITZ!Fon MT-F Cordless Telephone

The AVM FRITZ!Fon MT-F is an ideal handset for your
FRITZ!Box Fon WLAN 7340.
Proceed as follows to register the FRITZ!Fon MT-F at the
FRITZ!Box:
1. Switch the FRITZ!Fon MT-F on by pressing and holding
down the hang-up button.
2. Press the DECT button on your FRITZ!Box until the
FRITZ!Fon MT-F indicates that registration has been
successful.
The FRITZ!Fon MT-F is now connected with your FRITZ!Box
and can be used to make telephone calls.
If registration is not successful, see the instructions for
manual registration in the manual of your FRITZ!Fon MT-F.
Scope of Service of Your FRITZ!Fon MT-F
The FRITZ!Fon MT-F is optimized for connections with your
FRITZ!Box to provide not only telephone connections, but
a whole range of additional features.
•
With the FRITZ!Fon MT-F you can read the e-mail sent
to your e-mail account with an e-mail provider. For
this the POP3 protocol is used to retrieve your e-mail
from your mailbox at the e-mail provider so that it can
be displayed on the handset.
•
You can set up multiple e-mail accounts on your
FRITZ!Box, and, if you have more than one
FRITZ!Fon MT-F, assign the display of each account to a
certain FRITZ!Fon MT-F.
46