Reducing The Radiation Of Dect Emissions - Fritz! Box 7530AX Manual

User Interface: Telephony Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Reducing the Radiation of DECT Emissions

Overview
With the following settings you can reduce the radiation of DECT emis-
sions:
• Reduce DECT field strength: Enable this setting only if you use all
• DECT Eco: When DECT Eco is enabled, the FRITZ!Box switches off
You can enable these settings individually or at the same time.
Requirements
• All registered cordless telephones support DECT Eco: Under "Tele-
• The following devices are not registered with the FRITZ!Box:
Instructions: Reducing DECT Transmission Power
1.
2.
3.
4.
Instructions: Enabling DECT Eco
1.
2.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 7530 AX
DECT devices in the vicinity of the FRITZ!Box. Reducing the field
strength also reduces the range of the DECT radio network.
the DECT radio network as soon as all cordless telephones are in
standby mode. When a call arrives or you press a key on a cordless
telephone, the radio network is switched back on.
phony / DECT / Monitor" in the FRITZ!Box user interface, "DECT Eco
supported" is displayed for each telephone.
FRITZ!DECT devices with an outlet switch, FRITZ!DECT Repeater,
another FRITZ!Box in DECT repeater mode.
Open the user interface;
Select "Telephony / DECT / Base Station".
Enable the "Reduce DECT field strength" checkbox.
Click on "Apply".
Open the user interface;
Select "Telephony / DECT / Base Station".
see page 52.
see page 52.
114