Reducing The Radiation Of Dect Emissions - Fritz! Box 6850 LTE Configuration And Operation

User Interface: Telephony Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Reducing the Radiation of DECT Emissions

Overview
With the following settings you can reduce the radiation of DECT emis-
sions:
• Reduce DECT field strength: Enable this setting only if you use all
• DECT Eco: When DECT Eco is enabled, the FRITZ!Box switches off
You can enable these settings individually or at the same time.
Requirements
• All registered cordless telephones support DECT Eco: Under "Tele-
• The following devices are not registered with the FRITZ!Box: FRITZ!
Instructions: Reducing DECT Transmission Power
1.
2.
3.
4.
Instructions: Enabling DECT Eco
1.
2.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 6850 LTE
DECT devices in the vicinity of the FRITZ!Box. Reducing the field
strength also reduces the range of the DECT radio network.
the DECT radio network as soon as all cordless telephones are in
standby mode. When a call arrives or you press a key on a cordless
telephone, the radio network is switched back on.
phony / DECT / DECT Monitor" in the FRITZ!Box user interface,
"DECT Eco supported" is displayed for each telephone.
DECT devices with an outlet switch, FRITZ!DECT Repeater, another
FRITZ!Box in DECT repeater mode.
Open the user interface;
Select "Telephony / DECT / Base Station".
Enable the checkbox "Reduce DECT transmission power".
Click on "Apply".
Open the user interface;
Select "Telephony / DECT / Base Station".
see page 46.
see page 46.
102