Configuring On The Telephone - Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation

Configuring on the Telephone

9.3 Configuring on the Telephone
Saving New Settings
In this section, saving refers to all current settings made in
the FRITZ!Box. It is not necessary to save the configuration
immediately after every change. You may first configure all
of your settings as desired, and then save them perma-
nently.
Permanent saving cannot be reversed. However, you can
change the settings by using new commands or restore
the FRITZ!Box to its factory settings.
Saving Permanently
N
Pick up the handset.
r91ss
Save all settings permanently by dialing the
sequence shown at left.
O
Hang up the handset.
Restoring Factory Settings
All of the settings in the FRITZ!Box can be reset to their
condition upon delivery by restoring the factory settings.
All settings you made in the FRITZ!Box—including the con-
figured Internet connection—are deleted when the factory
settings are restored.
Restoring Factory Settings
r991s159
01590s
After factory settings are restored, the FRITZ!Box is restart-
ed.
Enabling and Disabling WLAN
The WLAN function can be switched on and off using the
telephone keypad. This is especially convenient when the
WLAN function has been switched off. Simply use your
Restores all settings in the FRITZ!Box to
their original condition.
68