Changing The Network Settings - Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation

Fixed IP Addresses when the DHCP Server Is Enabled
3.6

Changing the Network Settings

Fixed IP Addresses when the DHCP Server Is Enabled
If you would like to configure fixed IP addresses on indi-
vidual computers connected with the FRITZ!Box despite
the enabled DHCP server, please note the following:
•
The IP addresses must be from the IP network of the
FRITZ!Box.
•
The IP addresses may not come from the address
range of the DHCP server.
•
Each IP address can be assigned only once.
Disabling the DHCP Server
You can disable the DHCP server.
To make sure that all computers remain in the same IP net-
work as the FRITZ!Box, you must enter the IP addresses
manually in the computers' network settings. First disable
the option "Obtain an IP address automatically" and then
enter the IP address manually in the appropriate field.
In the case of the preset IP address of the FRITZ!Box, the
following IP addresses are available for assignment to the
computers:
192.168.178.2 - 192.168.178.254
Each IP address can be assigned only once.
In order to change the network settings of the FRITZ!Box,
the expert mode must be enabled in the user interface:
1. Start a web browser on your computer and enter
fritz.box in the address field of the browser.
2. Click "Expert Mode" in the "System" menu, enable
the setting "Show expert settings" and confirm this
setting by clicking "Apply".
Here is how to change the network settings:
1.
Select the "Home Network / Network" menu.
150