Leds - Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation

Table of Contents

Advertisement

Network Cable
1.2

LEDs

Network Cable
Additional network cable is required if you would like to
use all of the FRITZ!Box Fon WLAN 7340 network ports.
The FRITZ!Box Fon WLAN 7340 network cable (yellow) is a
standard category 5 (Cat5) Ethernet cable. If you need a
replacement cable, a longer cable or an extension, please
use a standard STP-type (Shielded Twisted Pair) Ethernet
cable of the category 5 or 5e (Cat5 or Cat5e). To extend the
cable you will need a shielded RJ45 double coupling (Cat5
or Cat5e) with a 1:1 pin assignment. You can use both
straight cables and crosslink cables. All components are
available from specialized vendors.
When components of a smaller category are used, re-
duced transmission rates may result.
AVM recommends using a network cable no more than
100 meters long.
Five LEDs are built into the top of the FRITZ!Box Fon
WLAN 7340, which flash or light up to display various con-
nection statuses.
118

Advertisement

Table of Contents
loading

Table of Contents