Configuration And Operation On The Telephone; Instructions For Operation At The Telephone - Fritz! Box Fon WLAN 7340 Installation, Configuration And Operation

Configuration and Operation on the Telephone

9 Configuration and Operation on the Telephone
FRITZ!Box Keypad Sequences
Acknowledgment
Tone
9.1

Instructions for Operation at the Telephone

Many of the FRITZ!Box functions and features can be
configured and used over a telephone connected to a
FRITZ!Box extension. Only tone-dialing (dual-tone multi-
frequency = DTMF) telephones can be used in configura-
tion and operation. Pulse dialing telephones are not suit-
able.
The telephone network features can be used only if they
are supported by your telephone network carrier and en-
abled on your telephone line.
Entries input on the telephone are confirmed with ac-
knowledgement tones (see also "Audio Signals" on
page 67):
•
Entries made correctly are confirmed with a positive
acknowledgement tone (a single tone of one second
in length).
•
If the entry was not successful, because of an incor-
rect key sequence, for instance, you hear a negative
acknowledgment tone (an intermittent tone broken
into intervals of about 0.25 seconds).
The table explains the icons used in this chapter:
Icon Action
M
Dial a number.
N
Pick up the handset.
O
Hang up the handset.
P
Talk.
D
Three-party conference call
Q
Wait for the acknowledgement tone.
K
You hear the ring tone.
66