Care And Cleaning - Breville BBL600XL ikon 600 User Manual

Operating your Breville ikon Blender
Reassembling your blender jug after
cleaning
Step 1.
Make sure all parts are clean and completely dry.
Step 2.
To reassemble the blender, replace the silicon seal
onto the blade assembly (see Fig 1). Turn the blender
pitcher over and insert the blade assembly housing
into the pitcher base (see Fig 2), making sure to align
the indicator symbol ( ) on the inside of the
pitcher base, with the indicator symbol (
the blade housing. Twist the 1 / turn Blade Removal
4
System anticlockwise in the direction of the indicator
symbol ( ) until firmly locked into position.
BE CAREFUL WHEN HANDLING THE BLENDING BLADES AS THEY ARE SHARP.
MISHANDLING OF THE BLADES MAY CAUSE INJURY.
12
continued
Fig 1
) on
Fig 2

Care and cleaning

Cleaning the motor base
• Wipe the motor base with a soft, damp cloth then
dry thoroughly.
• Wipe any excess food particles from the
power cord.
Do not use abrasive souring pads or cleaners
when cleaning the motor base as they may
scratch the surface.
Note
Cleaning the blender pitcher, lid, inner
lid and blade assembly
• Wash all parts in warm soapy water with a soft
cloth. Use a brush to dislodge stubborn foods.
Rinse and dry thoroughly.
• All jar, lid and blade assembly parts may also be
washed on the top shelf of any dishwasher
Removing stubborn or strong food stains
and odors
Strong smelling foods such as garlic, fish and some
vegetables such as carrots may leave an odor or
stain on the blender pitcher and lid. To remove, soak
blender pitcher and lid for 5 minutes in warm soapy
water. Then wash with a mild detergent and warm
water, rinse well and dry thoroughly.
Storage
Store your Breville ikon Blender upright with the
blender pitcher, lid and inner lid assembled and
inserted on the motor base or beside it. Do not place
anything on top.
13