Advertisement
Available languages
Available languages
Care & Cleaning
Remove the power cord from the power outlet
after use for safety reasons.
Processing bowl and lid
Due to the interlock components, we do not
recommend immersing the bowl in water for
long periods.
To keep your bowl and lid clean, and to avoid
food drying on, follow these steps as soon as
possible after use:
• Rinse most of the ingredients off the bowl
and lid.
• Hand wash in clean warm, soapy water
using a mild liquid detergent and non-
abrasive sponge.
• The processing bowl and lid may
occasionally be washed in the dishwasher
(top shelf only), however washing in the
dishwasher is not recommended on a
regular basis, as prolonged exposure to
harsh detergents, hot water and pressure
will damage and shorten the life of the
plastic and the interlock components.
WARNING
Oils in citrus rind can damage the material
of your food processor bowl if being exposed
to it for a longer period. Always clean your
processing bowl immediately after processing
citrus rind.
Blades and disks
• Blades and disks are razor sharp, do not
touch. Always use a spatula or brush to
remove food or when cleaning blades.
• Spindle, blades and disks can be washed
in the dishwasher.
20
Food Pushers
All parts in the pusher stack can be placed in
the dishwasher (top rack).
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry thoroughly. Wipe any excess
food particles from the power cord.
Dicing Accessories
Follow the assembly instructions for dicing
cleaner. After dicing use the dicing accessory
to clean out residual food.
Dicing accessories can be washed in the
dishwasher excluding the dicing gearbox.
Cleaning agents
Do not use abrasive scouring pads or cleansers
on either the motor base or the jug, as they may
scratch the surface. Use only warm soapy water
with a soft cloth.
Stubborn food stains and odors
Strong smelling foods such as garlic, fish and
some vegetables such as carrots may leave an
odor or stain the bowl or lid.
To remove, pour warm soapy water and fill to
the MAX LIQUID mark. Set aside to soak for
5 minutes, without immersing the whole bowl.
Then wash with a mild detergent and warm
water, rinse and dry thoroughly. Store the bowl
with the lid off.
Advertisement
