Table of Contents
Advertisement
4 DIAGNOSTICS
Field
EDID Data
User Setting Status
This diagnostic displays the user settings. The format may vary. The information is updated
when you display the diagnostic.
The User Setting Status fields are:
Setting
TV Type
HDMI/YPbPr
Output
Description
Indicates the video timing formats that were read from the
Extended Display Identification Data (EDID) register for the
connected device, in particular the detailed timing description
blocks. The list displays all of the formats that the DCX3200
could read, up to a maximum of 12 formats. If the DCX3200
cannot read any formats, EDID Data is blank. An asterisk (*)
after the aspect ratio means the DCX3200 supports the format.
If more than twelve video timing formats are discovered, the
supported formats only are listed first, followed by up to twelve
remaining formats.
Description
Allows you to specify the style of television connected to the DCX set-top.
Options include 16:9, 4:3 LETTERBOX, and 4:3 PAN SCAN. The 16:9 option is
the default selection. The options are used as follows:
•
16:9 designates that a widescreen television is connected to the DCX set-
top.
•
4:3 LETTERBOX designates that a standard-screen television is connected
to the DCX set-top and that widescreen programs should be scaled to fit
the screen with black bars above and below the picture.
•
4:3 PAN SCAN designates that a standard-screen television is connected
to the DCX set-top and that widescreen programs should be cropped so
that the picture fills the entire screen.
Allows you to specify the video output format of the DCX set-top for all content
(when the 4:3 override setting is Off) or for all 480p, 720p, and 1080i content
(when the 4:3 override is used). Options include 1080i, 720p, 480p, and 480i.
By default, the 1080i option is selected. The options are used as follows:
•
1080i — The DCX set-top presents programs in the High-Definition 1080i
55
Hide quick links:
Advertisement
Table of Contents
