Table of Contents
Advertisement
TV – EPG and TV
Portal (marked as a dot in a circle) - entering into so called viaTV Portal – access to many useful
functions and settings. More details about the Portal can be found at the end of this manual.
www – activates a web browser (not active at viaTV service).
2.3 Function color buttons
color
The low row of
buttons is used for context based functions in the viaTV Portal, EPG and teletext.
Their meanings may vary from application to application and they are always described in the lower part
of TV screen.
2.4 MENU / BACK / INFO buttons
Menu – toggles between the viaTV Portal and TV broadcast.
Info – displays help
3 Set-top box setting
Apart from a standard setting of the set-top box in-service on the so-called viaTV Portal (operation
of the Portal is provided below), you may perform several other settings in the beginning, in particular the
selection of the TV standard (TV system) of your television set and used outputs (output connectors).
For the purpose of their performance, immediately upon connecting the set-top box to the power supply
network, press the MENU button on the control and keep it pressed. In this way, you will get to the menu
for the television set output setting.
A screen, similar to the one in the figure below, should appear. At the same time, the LED diodes on the
front panel should start flashing, altering red and green; the same shall be applicable to every pressing
of any button on the remote control. (When the above-mentioned screen appears, you may release the
MENU button).
Note: In practice, due to the Portal, it is possible to set up everything under current operation, with
the exception of picture for HD definition setting (HDMI and YPbPr output). If you do not use the HD
output (as you use scart), we recommend skipping this section over. If you wish to use the HDMI
output (see bellow), you have to perform the setting here and prior to the beginning of the
operation of the viaTV service as such.
Please note that all pictures in the manual are directly photo-shot from a real TV screen for a 100%
accuracy with a real usage of the set-top box. However, this may lead to a slightly lower picture quality
than at computer printscreens.
viaTV_STBmanual_M1910_EN.doc
Movement on the screen and
changes setting is performed by
the cursor-movement keys on
the control (up, down, left, right)
and you use the "OK" button to
confirm a change. The field,
which is illuminated in light
green-blue is active.
You move between the illu-
minated items using arrow keys
up / down.
You undo / do up the menu
relating to the illuminated item
using left arrow / right arrow.
Page 5 (Total 38)
Hide quick links:
Advertisement
Table of Contents
