Operational Check For The Remote Control; Configuring The Audio, Video, And Closed Caption Settings; Table 3-1 Operational Check Procedures - Motorola DCX3200 P2 Installation Manual

3 INSTALLATION

Operational Check for the Remote Control

The operational check tests communication with the remote control:

Table 3-1 Operational check procedures

Feature
Power on
Channel selection
Volume control
If the DCX3200 does not operate properly, refer to the Troubleshooting section.

Configuring the Audio, Video, and Closed Caption Settings

This subsection describes how to configure the audio (for HDMI™ connections), SD and
HD video settings, and closed caption settings for the DCX3200.
Before you adjust the output settings:
•
Connect the DCX3200 to the TV and other home entertainment devices
•
Plug the DCX3200 into an AC power outlet
•
Initialize the DCX3200 and authorize it for services
•
Turn the TV on
When using an HDMI™ connection between the DCX3200 and the television, be sure
to have the cable connected and the TV powered on before adjusting the video settings.
Motorola recommends using certified Standard HDMI cables for 1080i or 720p
resolutions and certified High Speed HDMI cable for a resolution of 1080p.
To configure the DCX3200 settings on the main User Settings menu screen:
1. Power off the DCX3200 and then immediately press the
control. If the TV is on, the on-screen menu lists the settings you can adjust:
Testing Procedure
Press POWER on the remote control to turn on the DCX3200.
Scan through the channels using the CHANNEL + or - keys.
Tune to several channels by entering the channel number using the numeric keys.
Press VOLUME + or - on the remote control to set the volume to a desired level.
Press MUTE to turn the sound off. Press MUTE again to restore the sound.
22
key on the remote
MENU