Preparing The Remote Control For Use - Motorola VIP 1903 Installation Manual

YOUR VIP1903 AND VIP1963 PACKAGE
Enclosed material
The following material should be present in your package.
IP set-top box Remote control
with 2 AAA batteries
AC adaptor RF cable
(T models only)
PREPARING THE REMOTE CONTROL
FOR USE
In order to prepare your remote control for use, insert
the batteries.
Carefully place the terminals (+ and -) of the
batteries as indicated on the back of the battery
compartment.
Ethernet SCART
cable cable
Installation guide
4
PLACEMENT
Do not cover
Do not place anything on top of the set-top box, instead leave a free space
of 20 cm above it for proper ventilation and cooling.
When using the remote control, point it to the IR-receiver in the center of
the front panel. Make sure that there is no obstacle between the remote
control and the set-top box, such as for example a table.
For best reception of the IR-signals from the remote control to the set-top
box, make sure to place the set-top box close to the edge of the shelf.
5