Selecting Your Connection Diagrams - Cisco EXPLORER 2100 Installation Manual

Selecting Your Connection Diagrams

Introduction
This section provides a list of electronic devices that
connect to your DHCT. The Optional Devices list
includes devices that may be required for specifi c
combinations of viewing and listening preferences.
The TV and VCR Setup table includes the audio and
video options (non-stereo, stereo, and S-Video) on
your TV and VCR. Identify all of your devices, then go
to the page number shown and use the diagrams and
instructions to connect your devices to the DHCT.
Optional Devices
Some optional devices must be installed to provide
specifi c sound and viewing preferences. Review the
list and go to the page shown for instructions on
connecting the device in your system.
• VHF Transformer for non-cable-ready TV ............ 12
• Connecting a VCR Commander Module ............... 12
• RF Splitter for PIP viewing ..................................... 13
• RF Bypass Module for viewing cable
programming while recording premium
programming ......................................................... 14
• Digital Audio Decoder for surround sound ............ 16
• Stereo Receiver or Amplifi er for using
external speakers .........................................25 or 26
• Home Theatre Receiver for using
external speakers .................................................. 27
TV and VCR Setup
Use the table below to fi nd the page number of the
connection diagrams for your style of TV and VCR. Find
your TV style in the left column and fi nd your VCR style
across the top row. The intersection of the row and
column contains the page number of the connection
diagram for your specifi c TV and VCR.
VCR
None
TV
Stereo 18
TV
Non-Stereo 17
TV with
S-Video Input 23
VCR VCR VCR with
Stereo Non-Stereo S-Video Input
22 21
20 19
n/a n/a
n/a
n/a
24
9