Table of Contents
Advertisement
Optional Devices
Connecting a VHF Transformer for
Non-Cable-Ready TV
If your TV is not cable ready, follow these steps to
connect a VHF transformer.
After you connect the transformer, your TV is
considered "cable ready" and you can connect
additional electronic devices to your TV and the DHCT.
Continue with connecting your TV to the DHCT and
any other devices in system.
1
Connect to CABLE OUT on
DHCT or to OUT TO TV on VCR
Connect VHF transformer
2
3
Connect VHF antenna terminals
on TV
Do not use
4
Back of TV
12
Connecting a VCR Commander Module
The VCR Commander Module is a
device consisting of an infrared (IR)
transmitter and cable that allows
you to use the IPG (on-screen
menu) for selecting the programs
you want to record. You do not
have to set your VCR separately.
Your VCR automatically begins
recording the program you selected
at the set time and channel.
After connecting the VCR Commander Module to
your DHCT, place the IR transmitter in one of the four
locations shown in the following diagram.
Typical VCR
D
Contact your cable service provider for additional
information about the VCR Commander Module.
IR
S - VIDEO
VIDEO
OUT
OUT
IR Transmitter
C
DIGITAL AUDIO
OUT
CABLE
OUT
L
R
AUDIO
OUT
B
A
Advertisement
Table of Contents
