Network Setup; Login - Nuvico EV-400 Instruction Manual

6. NETWORK SETUP

CONFIG
If the DVR is connected to a static IP network line, set the CONFIG to STATIC IP. However, if the
DVR is connected to a DHCP server (router) or dynamic IP service internet modem (cable modem),
set the CONFIG to DHCP.
IP ADDRESS, NETMASK, & GATEWAY
Input the appropriate IP ADDRESS, NETMASK, & Default GATEWAY value.
PORT
Input the port number for the network connection, the default value is "7000".
Note: If you are using a dynamic IP internet service, hostname can be used to connect to the
DVR. Hostname can be found under the "INFO" tab in the "SYSTEM" menu.
i.e., INTERNET EXPLORER: http:// hostname.dvrhost.com:port#
NUVICO CMS Lite S/W: hostname.dvrhost.com:port#.

7. LOGIN

(For example: Y123456.dvrhost.com:7000)
CMS Lite Login:
3. Enter the IP address of the DVR or the
hostname.
(For example: 192.168.0.100:7000, or
Y123456.dvrhost.com:7000)
4. Enter the factory default password:
000000. (6 zeros
5. Click on the CONNECT button.
No
te: HOSTNAME can be found under the
"INFO" tab in the "SYSTEM" menu.
- 17 -
SETUP NETWOK
The network menu allows for
adjustment to TCP/IP settings
for viewing video across a local
area network or the Internet.
)